$580 Dell Poweredge R630 Hypervisor Server 28 CPU Cores, 128GB RAM, 10G Networking, iDRAC Enterprise

$580 Dell Poweredge R630 Hypervisor Server 28 CPU Cores, 128GB RAM, 10G Networking, iDRAC Enterprise

$580

Dell Poweredge R630

Specifications

  • CPU: 2x Intel Xeon E5-2680 V4’s – Each one has 14 Cores/28 Threads running between 2.4GHz-3.3GHz | 28 Cores/56 Threads Total
  • RAM: 128GB Registered ECC DDR4 (8x16GB)
  • Storage Drives: None, various SSDs/HDDs available or purchase in-store
  • Storage System: 8x Front 2.5″ Hot-Swap SAS/SATA Bays (4x Trays Incl.)
  • Storage Controller: Dell PERC H730 Dual Mode Controller – Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode
  • Remote Management: iDRAC 8 Enterprise
  • Networking: 4x RJ-45 Ethernet Ports [2x10G|2x1G]

Work Performed

  • BIOS, iDRAC, LC, and RAID have all been reset and cleared
  • All available firmware updates have been applied
  • The RAM has been replaced with tested modules from our inventory
  • The NDC has been replaced with a higher performance model
  • The CPUs have been replaced with higher performance models
  • The CPUs and Heatsinks have been thoroughly cleaned, and new Arctic thermal paste has been applied
  • The PSUs have been replaced with higher capacity models (2x 495W –> 2x 750W)

– 1U Rackmount Server

  • Rails: Available for $20 with purchase of this server
  • Bezel: Available for $10
  • Power: Dual Hot-Swap Redundant 750W PSUs
  • PCI-E Cards: None
  • Available Upgrades: Storage, Networking, Rails, Bezel, PSUs

Additional Notes: N/A

The storage drive(s) are blank and ready for you to install an OS of your choice. Additional information is available upon request.

Share

Written by:

31 Posts

View All Posts
Follow Me :

Leave a Reply

Discover more from GCB Servers & Service Center

Subscribe now to keep reading and get access to the full archive.

Continue reading