$560
Super Micro NAS
Specifications
- CPU: Intel Xeon E5-2630L V3 – 8 Cores/16 Threads running between 1.8GHz-2.9GHz
- RAM: 64GB Registered ECC DDR4 (4x16GB)
- Storage Drives: None, various SSDs/HDDs available for purchase in-store
- Primary Storage System: 16x Front 3.5″ Hot-Swap SAS/SATA Bays (All 16x Trays Incl.)
- Secondary Storage System: 2x Rear 2.5″ SATA Bays (Both Trays Incl.)
- Storage Controller: SAS3008 based SAS/SATA Compatible IT Mode HBA
- Remote Management: IPMI 2.0
- Networking: 2x Gigabit RJ-45 Ethernet Ports (Intel i350)
Work Performed
- BIOS and IPMI have been reset to factory defaults
- The CPU has been replaced with a faster and more power efficient model (Xeon E5-1620 V3 @140W TDP —> Xeon E5-2630L V3 @55W TDP)
- The RAM has been replaced with tested modules from our inventory
- The previous Hardware RAID Controller has been replaced with an IT Mode HBA
– Supermicro X10SRi-F Motherboard
– Supermicro CSE-836 Chassis
– Supermicro BPN-SAS3-836EL1 Backplane
- Rails: Available for $20 with purchase of this server
- Bezel: N/A
- Power: Dual 1000W Hot-Swap Redundant PSUs
- PCI-E Cards: HBA, external SAS connector
- Available Upgrades: Storage, Networking
Additional Notes: This server has a low TDP Xeon CPU installed, denoted by the L in the CPU’s model name
The storage drive(s) are blank and ready for you to install an OS of your choice. Additional information is available upon request.
