$360 Dell Poweredge R530 Storage Server NAS 16 CPU Cores, 64GB RAM, 8x HDD Bays, SAS and SATA Capable

$360 Dell Poweredge R530 Storage Server NAS 16 CPU Cores, 64GB RAM, 8x HDD Bays, SAS and SATA Capable

$360

Dell Poweredge R530

Specifications

  • CPU: 2x Intel Xeon E5-2630 V3’s – Each one has 8 Cores/16 Threads running between 2.4GHz-3.2GHz | 16 Cores/32 Threads Total
  • RAM: 64GB Registered ECC DDR4
  • Storage Drives: None, various SSDs/HDDs available for purchase in-store
  • Storage System: 8x Front 3.5″ Hot-Swap SAS/SATA Bays (All 8x Trays Incl.)
  • Storage Controller: Dell PERC H730 Dual Mode Controller – Supports both Hardware RAID/IR Mode and Software RAID/HBA/IT Mode
  • Remote Management: iDRAC 8 Basic
  • Networking: 6x 1GbE RJ-45 Ethernet Ports

Work Performed

  • BIOS, iDRAC, and Lifecycle Controller have all been reset and cleared
  • All available firmware updates have been applied
  • The RAM has been replaced with tested modules from our inventory
  • A PERC H730 has been added, along with it’s accompanying cable
  • A Dual Port 1GbE RJ-45 NIC has been added

– 2U Rackmount Server

  • Rails: Available for $70
  • Bezel: Available for $10
  • Power: Dual Hot-Swap Redundant 495W PSUs
  • PCI-E Cards: Dual Port NIC
  • Available Upgrades: Storage, Networking, PSUs, Rails, Bezel

Additional Notes: N/A

The storage drive(s) are blank and ready for you to install an OS of your choice. Additional information is available upon request.

Share

Written by:

33 Posts

View All Posts
Follow Me :

Leave a Reply

Discover more from GCB Servers & Service Center

Subscribe now to keep reading and get access to the full archive.

Continue reading