$150
Sophos XG 450 Rev.2
Specifications
- CPU: Intel Xeon E3-1275 V5 – 4 Cores/8 Threads running between 3.6GHz-4.0GHz
- RAM: 16GB DDR4 (2x8GB)
- Storage Drives: 2x 240GB SATA 2.5″ SSDs
- Storage System: 2x Internal 2.5″ SATA Bays
- Storage Controller: Integrated SATA Controller
- Remote Management: IPMI
- Networking: 8x Gigabit RJ-45 Ports & 4x 10G SFP+ Ports
Work Performed
- BIOS was reset to factory defaults, then configured for OPNsense
- The 2x 240GB SSDs were wiped prior to installing OPNsense
- OPNsense has been installed
Configuration
- Rails: None
- Bezel: None
- Power: Single Hot-Swap PSU (only hot-swappable if second PSU is installed)
- Available Upgrades: None
Additional Notes: This unit has OPNsense 26.1.6 installed, the install went smoothly and without any errors. We have not done any configuration of the OS, it’s in the default state, ready to be configured for your use.
The storage drive(s) are blank and ready for you to install an OS of your choice. Additional information is available upon request.
